Tools - Equipment

American Lock AFT Tool Follower for American Padlocks - Follower tool for rekeying American Padlocks. Follower works with both standard size padlock cylinder and full size Commercial/ Residential compatible keyway American cylinders. Follower has a...

Ilco 814-00-51 Nylon Brush Wheel for most Ilco, Taylor, Dominion key machines. 3" Diam. 1/2" arbor mounting hole Diam. Nylon material - 814-00-51.  

HPC 9120RM Mini-Speedex key machine by HPC. Supplied with 4-way jaws, and deburring brush. Standard Voltage: 120VAC - other models available at additional cost and lead times.   More Specifications (PDF File)

Key Cutter 23RF Fine Milling, diameter 2.25", 0.25" thickness, 0.5" center hole diameter. Works on the following key machines: Ilco 2184CD, H2584CV, 2585DU, 008, 190; DL 145, 145M, 147, 149M; HPC 9100, 9110; Taylor KD1, KD5, KD20; Keil 4-1/2, 12-1/2,...

HPC TYX-3 Soft Brush For Key Machines - The HPC Softie brush is the only key machine brush made of Tylon-X. The carbide impregnated brush de-burrs faster, smoother, and lasts 6 times longer than wire. No more flying wire strands and brush flaring. Approx...

HPC PTT-4 Pin Tumbler Tweezers - The groove in the tip provides a firm, non-twisting grip on cylinder pins for easy loading. The tip is also milled back so that the outside diameter of a standard .115" (2.92mm) pin extends past the tip. This permits the...

HPC SUT-14 Rekeying tools - Plug follower set for most common size cylinders. The Hollow Brass Follower Set contains 3 popular sizes of hollow brass followers. Use these followers on a variety of locks including the Corbin Russwin heavy duty knob lock...

HPC CW-23RM Replacement key machine cutting wheel for the Speedex 9120RM. Milling cutter with 2.25" diameter, 0.25" thickness, and a 0.50" center hole.

HPC PTT-5 Pin Tumbler Tweezers, Compact Style - At only 4" (10cm) long, these tweezers allow you to get closer to the action. The specially milled tips grip top and bottom pins firmly. The PTT-5 is a compact, pocket-sized pinning aid.    

Schlage M504-341 Spanner Wrench Tool, Old Style for D-Series Knobs and L-Series Replaced by Schlage 021415 - we will have some available soon.  

Schlage 021415 Spanner Wrench Tool for D-Series Knobs and L-Series    

HPC CW-23MC Tool steel cutter with teeth on both sides. Standard replacement cutter for 9160MC and 9180MC.