Tools - Equipment

American Lock AFT Tool Follower for American Padlocks - Follower tool for rekeying American Padlocks. Follower works with both standard size padlock cylinder and full size Commercial/ Residential compatible keyway American cylinders. Follower has a...

Mini-Speedex key machine by HPC. Supplied with 4-way jaws, and deburring brush. Standard Voltage: 120VAC - other models available at additional cost and lead times. More Specifications (PDF File)

Nylon Brush Wheel for most Ilco, Taylor, Dominion key machines. 3" Diam. 1/2" arbor mounting hole Diam. Nylon material. 814-00-51.

Key Cutter 23RF Fine Milling, diameter 2.25", 0.25" thickness, 0.5" center hole diameter. Works on the following key machines: Ilco 2184CD, H2584CV, 2585DU, 008, 190; DL 145, 145M, 147, 149M; HPC 9100, 9110; Taylor KD1, KD5, KD20; Keil 4-1/2, 12-1/2,...

HPC TYX-3 Soft Brush For Key Machines - The HPC Softie brush is the only key machine brush made of Tylon-X. The carbide impregnated brush de-burrs faster, smoother, and lasts 6 times longer than wire. No more flying wire strands and brush flaring. Approx...

HPC SUT-14 Rekeying tools - Plug follower set for most common size cylinders.The Hollow Brass Follower Set contains 3 popular sizes of chrome plated, hollow brass followers. Use these followers on a variety of locks including the Corbin Russwin heavy...

HPC PTT-4 Pin Tumbler Tweezers - The groove in the tip provides a firm, non-twisting grip on cylinder pins for easy loading. The tip is also milled back so that the outside diameter of a standard .115" (2.92mm) pin extends past the tip. This permits the...

Ilco 008A-75 Replacement key machine motor for the Ilco Mini-Mite key machine 008A - works with 008A and 008B machines. 110VAC Motor supplied as standard, and normally from in-house stock. 12VDC motor available as special order - allow 3-4 weeks for...

HPC CW-23RM Replacement key machine cutting wheel for the Speedex 9120RM. Milling cutter with 2.25" diameter, 0.25" thickness, and a 0.50" center hole.              

HPC PTT-5 Pin Tumbler Tweezers, Compact Style - At only 4" (10cm) long, these tweezers allow you to get closer to the action. The specially milled tips grip top and bottom pins firmly. The PTT-5 is a compact, pocket-sized pinning aid.    

Ilco 008-20 Cutter Shaft Bushing, For 008 Key Machine (2-pack) - Replacement part for Ilco 008 key machine. Shaft bushing# 008-20, Sold As a Pair              

HPC CW-23MC Tool steel cutter with teeth on both sides. Standard replacement cutter for 9160MC and 9180MC.