Cam Lock Parts/Accessories

ESP PR-07 Spur Washer for cam locks - Helps to hold cam lock firm in wood applications. PR-07 The center hole dimension is designed to fit ESP and Similar cam locks: Cut out designed for 0.64" flat to flat, 0.76" top to bottom

ESP V11300-3 / ULP-08 Mounting Nut for ESP/Hudson Cam Lock Approximate Measurements: Nut to mount the cam locks to the door is 3/4" x 24 threads and 1/8" thick. The dimension across the flats (aka wrench size) is 7/8". The inside hole diameter is 3/4"...

ESP/Hudson PR-06A Spacer for Cam Lock 1/8" Nickel Spacer/Trim Ring for cam locks - approx. 1/8". Hole cutout is approx. 0.76" High and 0.64" width Helps to adjust overall length of lock, or remove slack from a locked application.  

ESP PR-W-Washer / Hudson V11016-363-0701 Mounting washer for standard cam locks. 0.630 - 0.635 flats for metal or wood. Aprox. 1/16" thick.     

7850DC Dust Cover for Combination Cam Lock, Sold Each - Dust cover for combination cam locks - black flexible plastic, sold each.      

ESP PR17 Cam lock C-clip for clip on mounting of standard cam locks. Some cam locks mount with a nut, others a C-clip. Not all locks have the grooves in the housing to use a C-Clip. Sold each. Image may vary slightly over time due to manufacturer...

ESP V11004-1-0000 / ULP-11 Replacement retaining screw for ESP cam locks.  

T104 Metal Dust Cover, for Cam Locks - Protect cam locks and utility locks with a metal dust cover with spring loaded closure. Designed for standard cam locks and switch locks - sold each.              

Compx Chicago D9655-WC Protects switch locks and cam locks from the elements with this economical, easy to install weather cover. Quality construction includes: Chrome plated zinc die cast cover. Stainless Steel mounting ring. Permanently mounted rubber...

Rotation limiter for standard/common cam locks. Works with ESP, XL, Fort and others.

Olympus P95-CM-3 Cascade Series Cams for use with: 953, 954, 955, 960 and 961 Cam Locks 3" flat cam measured from centerline of mounting square to tip of cam. Cam sold each.

ESP V11-016-364 replacement spline fillers for ESP Cam Locks - utilized to prevent key from coming out in unlocked position. Normally two are required per lock. (Item supplied in a 10-pack)