Tools

Major Mfg HIT-45RB4 Router Bit Special single flute 1/4" down shear router bit used to route openings in aluminum doors and frames. NOT FOR USE ON STEEL DOORS AND JAMBS. Aluminum Door Preparation/Instruction Manual (PDF File)  

Major Mfg HIT-41HS1 Template for HES Electric Strikes - Router template for HES 5000 and 5700 series template with the 501AL faceplate option. Faceplate size is 1 1/4" x 4 7/8" with round corners. Mounts to door or frame with self-drilling screws...

Major Mfg HIT-45TG5 Router Adapter Template guide for Porter Cable, Dewalt & newer Craftsman routers . 3/8" outside template guide for use with a 1/4" diameter bit for cutting aluminum doors and frames. Aluminum Door Preparation/Instruction Manual...

Major Mfg MDPS-4 Tool to create the Double-D cut out in thin metal office furniture desks, or similar material 18 gauge or lighter. Hole size 0.645 wide by 0.770 high. More Specifications (PDF File)  

Major LMB-08 supplied with adapters to conform to flat, radius or bevel face doors. Never be without the right bracket. Build-in screw jacks eliminate slipping, twisting and screw stripping during installation. 1 pair of brackets per package. More...

Major Mfg HIT-41AR1 Template for Adams Rite 7100 Electric Strike - template is used to install Adams Rite 7100 ASA strike. aceplate size 1-1/4" x 4-7/8". Requires a router with a 3/8" outside diameter template guide and a 1/4" diameter router bit. (Part...

Major Mfg MDLT-1 Latch forming tool for lock installations, for use on standard 18 gage steel doors. The Pit Bull tool is used to form a rectangular pocket in the edge of a hollow metal door. Application of the tool is almost effortless, simply drill the...

Major Mfg MCE-X034 Extension kit used to add 3/4 length to an existing mortise cylinder. Choose a drive cam (not included) from the available models. To properly drill and tap the mortise cylinder for the extension, use the MCE-100 drill/tap guide...

Major MFG MCE-D1 Cylinder drive cam for American, Kaba, LSDA, Marks, Schlage(Std) U.S. Lock and Uscan brand cylinders. Not included in Extend-A-Cylinder kit. Proper length cam screws included with driver. Driver will work for all Extend-A-Cylinder length...

Quickly service Schlage OEM locks with this tool. Side "A" will easily remove the threaded cap from Schlage cylinders including the new "B" series with the longer cam driver. The "B" side is used to depress the cylinder cap pin and turn the tailpiece on...

Extension kit used to add 1 length to an existing mortise cylinder. Choose a drive cam (not included) from the available models. To properly drill and tap the mortise cylinder for the extension, use the MCE-100 drill/tap guide. Extension kit includes...

Replacement carbide bit for the HIT-66-200 mortiser. 1-1/16 diameter