International

Door closer installation plate supplied in dark bronze paint finish. Used when there is not enough room on door, or header for closer body. Pre-threaded mounting holes. Used with #4 size International door closers (eg. 654)

Aluminum (mill) finish door pull designed for narrow stile doors. Mounts with studs threaded into surface of aluminum door. (2 studs provided)

Door portion for center hung top pivot - AL Finish. Painted Satin Aluminum finish 400-PD

Overhead concealed door closer, optional anchor set 3010-FA. (FA used for concealed closers with adjustable spring screw making the adjustment screw hole accessible). For series 300, 400 and 500 series.

Face plate for storefront hardware using deadlatch with weatherstip - dark bronze finish

Intermediate Pivot Set - 3/4" offset for use with Aluminum Doors and Frames - AL Finish Baked Satin Aluminum paint finish Full race ball bearing backed by an oilite bronze bushing in the door portion. Case hardened pin in jamb portion fully retractable...

International IDC FP4512 DU Replacement faceplate for storefront deadlatch - DU finish.

International OP-2700 DU Brown Pivot Set - 3/4" offset for use with Aluminum Doors and Frames - DU Finish Baked storefront bronze paint finish 1/8" vertrical adjustment For doors up to 125 lbs. Case hardened stud in floor/jamb portion Full race ball...

For use with FB-1200 and FB-2200 Series International Flushbolts. Extension rod: 1/4-20 x 12" threaded rod, includes coupler. ER-1200

Hold Open arm and parallel arm kit can be used on 600, 5000, and 8000 Series International Door Closers, as well as some other brands.

Deadlatch for storefront door - dark bronze DU finish. 31/32" Backset (Measured from edge of door to center of key cylinder bore). Field reversible. Accepts standard mortise key cylinder, or thumb turn (Sold Separate). SS-4510 strike included. If handing...

Dress plate for center hung pivot - DU Finish. Painted Storefront Bronze finish 400-PC-DU