Key Machine Parts

Ilco 008-6X, BD0222XXXX Replacement part for Ilco 008 key machine. 008-6X, Thrust Bearing Set. (4 washers and 2 bearing washers per set). Compatible with 017-6, 025-6X, 1-59 BD0222XXXX replacement parts - no longer available when out  

Ilco/Silca D745853ZB, D945853ZR Replacement nylon brush for Ilco/Silca 008 Flash  Overall Diameter: Approx: 2-5/16" Spindle Hole: Approx 10mm (0.39")

Ilco X23MC (CU12) Replacement Key Cutting Wheel Part# X23MC Milling H.S.S. Diameter: 2.375"  Thickness: 0.104" Center Hole: 0.50" Used on the following machines: Ilco 023, 025, 045; DL 143M,145, 145M, 148M; Taylor 143MT, 145MT- X23MC. A=0, B=45, F=...

Replacement part for Ilco 008 key machine. Carriage Shaft/Spindle 008-23 - sold each. Approx Dimensions 7-15/16" x 1/2"   This item has been discontinued by the manufacturer - no longer available.

Ilco CU5 Milling Cutter - CU5 Key Machine cutter, 2.25" diameter, .25" thick, .50 hole diameter. Milling cutter wheel, Tool Steel (TS). Works with Taylor KD1, KD5, KD20, KD6; and others. A=0, B=45, F=0.020              

Kaba Ilco 008-2 (3-57) Key Clamp Studs (Pair), BD0223XXXX              

Ilco 19MC Milling cutter with 2.875" diameter, 0.28" thickness, and a 0.50" center hole. For machine: Ilco 2183DM, 2183HM, 006, 010; Keil 1, 1-1/2, 10        

Replacement Ilco CU11 key machine cutter for Ryan and Borkey Rexa Key machine. 80mm diamter, 4.97mm thick with 16mm center hole diameter.

Ilco D945810ZR Replacement key cutter for Ilco/Silca 008 Flash - Prismatic Cutter D945810ZR, Ilco BC0600XXXX              

Ilco/Silca F44 (D740448ZB) Cutter for Matrix - 057-HS for Matrix Key Machine      

Replacement key machine wing nuts, BD0242XXXX, sold in a set of two. Compatible with ILCO 006,008,010,012,016,027,2178, 2183DM, 2183HM, 2584, 2585; Keil 1 1/2, 12 1/2, 15 1/2              

Ilco SMS45 (BC0255XXXX) Side Milling Slotter Cutting Wheel SMS45, BC0255XXXX sold each. Specifications: High Speed Steel, diameter: 2.375" (60.32mm), thickness: .045" (1.14 mm), Center hole diameter: 0.5" (12.7mm). May be used on key machines: Ilco 046,...