Tools - Equipment

Kaba Ilco 1103-264-A, BD0329XXXX Replacement key machine wing nuts, 1103-264-A, BD0329XXXX, sold in a set of two. Compatible with ILCO 020, 022, 023, 024, 025, 026, 040, 045, 044, 046; Dominion 143, 144, 145, 146, 147, 132, 150; Taylor...

Replacement part for Ilco 008 key machine. Carriage Shaft/Spindle 008-23 - sold each. Approx Dimensions 7-15/16" x 1/2"

Replacement key machine cutter HPC CW-1012 used on 1200CM code machine for cutting Medeco Keys.

Ilco 19MC Milling cutter with 2.875" diameter, 0.28" thickness, and a 0.50" center hole. For machine: Ilco 2183DM, 2183HM, 006, 010; Keil 1, 1-1/2, 10        

Ilco D945810ZR Replacement key cutter for Ilco/Silca 008 Flash - Prismatic Cutter D945810ZR, Ilco BC0600XXXX              

Replacement Ilco CU11 key machine cutter for Ryan and Borkey Rexa Key machine. 80mm diamter, 4.97mm thick with 16mm center hole diameter.

Ilco SMS45 (BC0255XXXX) Side Milling Slotter Cutting Wheel SMS45, BC0255XXXX sold each. Specifications: High Speed Steel, diameter: 2.375" (60.32mm), thickness: .045" (1.14 mm), Center hole diameter: 0.5" (12.7mm). May be used on key machines: Ilco 046,...

Accessory Pack 27X for the Ilco 008 key machine (and others) - includes a #27 slotter, washer, and instructions.   Item has been discontinued by the manufacturer  

Ilco 008 Key Machine Carriage assembly only (item #1, 008-1) for 008, 008A, 008B key machines. Part line diagram ( number 1) item 008-1 or B2419401.              

HPC CW-1011 90 angle, small cylinder cutter. For use with most automotive locks and small cylinder locks.

Ilco CU50A Replacement Ilco CU50A Key Cutter for SIlca Bravo II, Bravo III with EZ Jaw, Ilco KD50A, KD50C. 80mm Diameter, 5mm thick, 16mm Dia Center Hole  

Kaba Ilco #27 slotter cutting wheel used on machines: Ilco 008, 008A, 008B, 2184CD, 2584CV; DL 146, 146M; HPC 9100, 9110; Taylor KD1; Keil 4-1/2, 12-1/2  BC0034XXXX